Lever hoist (D1 type)0.75ton

제품코드	G043866
판매 회사명	대산기계
연락처	02-2613-4061
홈페이지	-
제품홍보관	http://blog.yeogie.com/daesan61

Specialties With a high-hardened special alloy steel load chain. - Lock proof If the handle is locked under a short load, the lock-releasing mechanism acts to set the handle free to move - Responsive handle In all models, 6 pinion gear teeth and 4 load sheave pawls offer a large speed reduction ratio. The handle is by far more responsive. - Short handle The short handle with a short stroke ensures the highest working efficiency even in a narrow space. - Easy of quick return, and safe The two-step "conscious" operation of pushing the positive lever and pulling the grip ring helps prevent the accident of dropping the load due to a careless operation - Non-bending side plate The load-bearing side plate is independent of the brake support so that the side plate is protecte against warping due to a local concentration of forces. - Rugged frame Since one side is rigidly secured with a rivet-type stay bolt, the frame is sturdy and free of displacement which is a disadvantage of other levers.

1. Depress the Lock Lever until it hits the bottom and pull the grip ring towards you. 2. The chain can be adjusted up and down by hand. 3. To terminat the idling, set the change lever to the down position Then depressing the lock lever as far as it goes, push the grip ring gently so as to let the lever engage the outer edge of the lever. Thereafter, grip the grip ring and handle with a single hand, push them in as it is rotated counterclockwise. The lock lever returns to the original position.

Suitable for universal application and maintenance free. Loading capacity from 0.75ton to 6 ton. - Equipped with a spur gear. - Enclosed gearing with friction bearing. - High tensile link chain in accordance with CE standards. - Upheld in every position by a mounted-in load pressure brake. - Smooth running - Little operating force - Asbestos-free brake discs. - Optional for galvanized load chain or higher liftfall.

[top]

CE Mark Dimension

[top]

Specification

CAPACITY 0.75 ton 1.5 ton 3 ton 6 ton STANDARD LIFT 1.5m 1.5m 1.5m 1m NET WEIGHT 6.9kg 9.7kg 16.3kg 26.7kg MIN DISTANCE BETWEEN HOOKS 295mm 325mm 385mm 590mm PULLING EFFORTS 16kg 18kg 33kg 35kg MODEL NO D 08 D 15 D 30 D 60 a 147mm 163mm 192mm 192mm b 128mm 147mm 181mm 235mm c 295mm 325mm 395mm 590mm d 260mm 370mm 370mm 370mm g 26mm 33mm 42mm 46mm

[top]

Maintenance & Inspection

To Operate lever hoist Set change lever in desired direction, UP and DOWN, and operate handle back and forth to move load in desired direction. Do not move chain to the extreme end in either direction. Brake is always active, regardless of direction of movement. However, do not attach a load to the puller when puller is in free-wheeling mode, and never put the puller in free-wheeling position when a load is attached.

To adjust chain length a short distance, a. For a short distance, refer to Figure 1, setting change lever in central position and turn grip ring by hand. b. For major adjustment, refer to Figure 2a, 2b, 2c. - Figure 2a: Depress retaining pawl with finger and pull grip ring outward. Let pawl return to original position - Figure 2b: Adjust freely in either direction - Figure 2c: Set change lever in DOWN position. While depressing retaining pawl as far as it goes, push grip ring gently to let pawl engage outer edge of retaining plate. Grasp ring and handle lever with one hand and push in while rotating handle lever clockwise. Retaining pawl is now in original position and free-wheeling or idling is terminated. To test Brake Lift a light load and set it down a few times to test for brake slippage. If the rotational play of the grip ring is excessive, adjust brake.

※ 출처 : 여기에 기계플라자 - [G043866] Lever hoist (D1 type)0.75ton